New Page 1

Americor Electronics, Ltd. 675 S. Lively Blvd. Elk Grove Village IL. 60007 Phone: 847-956-6200 Fax: 847-956-0300 Email: info@americor-usa.com

DC Power Supplies - Switching Power Supplies

Single Phase DC Power Supply - Three Phase DC Power Supply

Single Phase Switching Power Supply - Three Phase Switching Power Supply

Single Phase Switching Power Supply for High Switching Performance

Single Phase Switching Power Supply for Medical Uses

Back to Single Phase Encapsulated Transformers

Back to Index

To Toroidal Core Transformers

Please Note:

All transformers can be supplied with different Input Voltage, Output Voltage and Output Power.

Please contact us for technical information.

All transformers are made to customer specification.

In some cases transformers are available from Stock

type: ENT	Dc power supply executed as safety transformer according to DIN EN 61558, VDE 0570, part 2-6 with silicon bridge rectifier and smoothing capacitor. Secondary LED status display, keyhole fastening. Residual ripple < 5%. Terminal connection, type of enclosure IP 00, prepared for safety class I, 50/60 Hz, ta 40°C.	type: EN	Dc power supply executed as safety transformer according to DIN EN 61558, VDE 0570, part 2-6 with silicon bridge rectifier and smoothing capacitor. Secondary fuse and LED status display, keyhole fastening. Residual ripple < 5%. Terminal connection and terminal connection with a plug-in system, type of enclosure IP 00, prepared for safety class I, 50/60 Hz, ta 40°C.
type: MGSIV	Dc power supply executed as safety transformer according to DIN EN 61558, VDE 0570, part 2-6 with silicon bridge rectifier and smoothing capacitor. Secondary fuse and LED status display. Residual ripple < 5%. Terminal connection, encapsulated in insulation box, type of enclosure IP 00, prepared for safety class II, 50/60 Hz, ta 40°C.	type: ENS	Dc power supply executed as safety transformer according to DIN EN 61558, VDE 0570, part 2-6 with silicon bridge rectifier and smoothing capacitor. Secondary LED status display, snap fixation for DIN mounting rail, TS 35. Residual ripple < 5%. Terminal connection, type of enclosure IP 00, prepared for safety class I, 50/60 Hz, ta 40°C.
type: DGO	Dc power supply executed as three-phase safety transformer according to DIN EN 61558, VDE 0570, part 2-6 with silicon bridge rectifier. Residual ripple < 5%. Terminals with screw-,and plug-in connection (6.3 x 0.8 mm), prepared for safety class I, 50/60 Hz, ta 40°C, dip impregnation, color green RAL 6004.	type: DGA	Dc power supply executed as three-phase safety transformer according to DIN EN 61558, VDE 0570, part 2-6 with silicon bridge rectifier. Residual ripple < 5%. Terminals with screw-, and plug-in connection (6.3 x 0.8 mm), prepared for safety class I, 50/60 Hz, ta 40°C, dip impregnation, color green RAL 6004.
type: MGSIM	Dc power supply executed as safety transformer according to DIN EN 61558, VDE 0570, part 2-6. Type MGSIM: Residual ripple < 3%, type MGSIM-S: Residual ripple < 10 mV. Incorporated thermal fuse, short-circuit-proof. Snap fixation TS 35, dc power supply in plastic casing, prepared for safety class II, type of enclosure IP 00, 50/60 Hz, ta 40°C.	type: MGSIM-S	Dc power supply executed as safety transformer according to DIN EN 61558, VDE 0570, part 2-6. Type MGSIM: Residual ripple < 3%, type MGSIM-S: Residual ripple < 10 mV. Incorporated thermal fuse, short-circuit-proof. Snap fixation TS 35, dc power supply in plastic casing, prepared for safety class II, type of enclosure IP 00, 50/60 Hz, ta 40°C.
type: NV	Primary-cycled power supply according DIN EN 60950. Primary and secondary connections at terminals, protection IP 20, protection class II, 50/60 Hz. For distribution, can be used for building automation, safety techniques, entrance control, sensory analysis and video checking. These products can be mounted on mounting rails as well as at walls.	type: SNT-I	Primary-cycled power supply in sheet steel casing All outputs are short-circuit proof and overvoltage resistant. Residual ripple < 120 mV/SS, Terminals with screw connections. LED operation indicator, 47 ~ 63 Hz, type of enclosure IP 00.
type: SNT	Primary-cycled power supply in sheet steel casing All outputs are short-circuit proof and voltage surge resistant. Residual ripple at 12 V: < 125 mV/SS, at 24 V: < 150 mV/SS. Terminals with screw connections. LED operation indicator, 47 ~ 63 Hz, type of enclosure IP 00.	type: SNT-A	Primary-cycled power supply, acc. To EN 60950 and UL 508, metal casing (> 60 VA) for installation on DIN rail TS 35. All outputs are short-circuit proof and voltage surge resistant. Ripple < 150 mVpp. Terminals with screw connections, prepared for safety class I, 50/60 Hz, ta 45°C, type of enclosure IP 00.
type: SNT-HV	Primary-cycled single-phase power supply according EN 60950, in metal casing for installation on DIN rail TS 35, high input voltage, Residual ripple < 80 mVpp. Screw connections, prepared for protection class I, 47-63 Hz, ta -10°C +70°C, without ventilator	type: SNT-MA	Primary-cycled power supply, acc. To EN 60950 and UL 508, plastic casing for installation on DIN rail TS 35. All outputs are short-circuit proof and voltage surge resistant. Ripple < 100 mVpp. Terminals with screw connections, prepared for safety class I, 50/60 Hz, ta 45°C, type of enclosure IP 00.
type: SNT-DC	Primary-cycled Three-phase power supply, acc. To EN 60950 and UL 1950, metal casing. All outputs are short-circuit proof and voltage surge resistant. Ripple < 100 mVpp. Terminals with screw connections, 47~63 Hz, ta 60°C, type of enclosure IP 00.