|
|
|
Americor Electronics Ltd. - 675 S. Lively Blvd. - Elk Grove Village, Illinois 60007
Tel.: [847] 956-6200 - Fax.: [847] 956-0300 - Toll Free: [800] 830-5337 - E-mail: info@americor-usa.com - www.americor-usa.com
| Back to Index |
IEC Power Inlet 320 - C13
| Specifications: | |
| Power Rating: | Domestic: 15 Amp. 125 / International: 10 Amp.250 Volt |
| Insulation Resistance: | DC 500 Volt 100 W (min) |
| Dielectric Strength: | 2000 VAC / 1 Minute |
| Housing Material | Nylon 6.6 UL 94V-0 or 94V-2 |
| Manufacturers Specification | EN 60320; UL 817 - 498 |
|
Part Numbers: AEL-Part Number - X1 - X2 - X3
Example AEL-WS-042-1- 3 -20
[Part Number WS-042-1: 6.4 mm Terminals and a Panel Thickness of 2.0 mm ] |
Termination (X1) |
PCB Terminal Length (X2) only if applicable |
Panel Thickness (X3) |
|||
| 0 | Solder Terminals | A | 3.02 mm | 0.8 | 0.8 mm | |
| 1 | 2.8 mm Quick Disconnect Terminals | B | 3.5 mm | 10 | 1.0 mm | |
| 2 | 4.8 mm Quick Disconnect Terminals | C | 5.3 mm | 15 | 1.5 mm | |
| 3 | 6.4 mm Quick Disconnect Terminals | D | 6.8 mm | 20 | 2.0 mm | |
| 4 | PCB Terminals | E | 10.8 mm | 30 | 3.0mm | |
| Configuration |
Mounting |
Part Number | Termination X1 | PCB Term. X2 | Panel Thick.X3 | Approvals |
Click for Print | ||||||||||||
| 0 | 1 | 2 | 3 | 4 | A | B | C | D | E | .08 | 10 | 15 | 20 | 30 | |||||
 |
Flange Mounting | AEL-JR-121 | X | Not Applicable |
Not Applicable |
 |
 | ||||||||||||
 |
Flange Mounting | AEL-WS-042 | X | X |
 |
| |||||||||||||
 |
Flange Mounting | AEL-WS-042-2 | X | X |
|
| |||||||||||||
 |
Flange Mounting | AEL-JR-121-PCB | X |
|
| ||||||||||||||
 |
Snap-In Mounting |
AEL-WS-042-1 | X |
 |
| ||||||||||||||
.JPG) |
Snap-In Mounting |
AEL-JR-121S-(10) | X | X | X | X | X | X |
|
| |||||||||
 |
Snap-In Mounting |
AEL-JR-121S-G | X | | |||||||||||||||
